Español
English
Français
Bluetooth remote control powered at 115-230V with 500mV stereo line output. Injects the line signal into amplifiers, mixers, mixing consoles or matrices.
It has auxiliary input for TV and Multimedia through rear terminal strip and front stereo jack input, as well as PIN input for priority announcements.
1210.PreOut
Bluetooth remote control with AUX and PIN inputs and line output
Bluetooth remote control powered at 115-230V with 500mV stereo line output. Injects the line signal into amplifiers, mixers, mixing consoles or matrices.
It has auxiliary input for TV and Multimedia through rear terminal strip and front stereo jack input, as well as PIN input for priority announcements.
Do you have questions about this product? Contact our support:
sat_consultas@egiaudio.com
Control unit with independent power supply, with selection of 3 sound sources (Bluetooth®, AUX and IN), stereo preamplifier and priority warning input.
Direct power supply from 115 to 230 V~ and 50/60Hz multi-voltage AC mains.
Bluetooth® version 4 receiver with A2DP-SINK stereo profile, with 8 storable links for Bluetooth transmitters.
Front AUX audio input via 3.5 mm stereo jack input.
Rear audio input via special stereo IN terminal strip.
Memory for 8 bluetooth® devices, with active memory and deletion for new bluetooth® devices.
Access to bluetooth® by pressing instead of PIN code access".
On and off stand-by, by short press.
Digital volume up or down in 32 steps, in 2 dB steps.
Pre-amplified stereo output direct to TV or audio stage to amplify the signal, either individually or at the same time.
Input for PIN warning signals with priority over all sound sources.
Multicolor LED status indicator (Blue: bluetooth. Green: IN. Yellow: AUX and Red: PIN signals).
Finish: white.
1210.PreOut
No customer reviews for the moment.